|
|
Post by SFC (R) B on Nov 9, 2023 17:51:09 GMT -5
My rifle manager has put all our Christensens on 20% off!! If you are looking for anything PM me and I'll get you hooked up!!
|
|
|
|
Post by BigJLocke on Nov 9, 2023 20:27:51 GMT -5
Where is this?
|
|
|
|
Post by SFC (R) B on Nov 9, 2023 21:28:50 GMT -5
My shop is in Colorado Springs, but I can ship to any FFL. |
|
|
|
Post by parrothead on Nov 10, 2023 9:14:01 GMT -5
How is accuracy on those. Read about guys not being able to get some on them to hold tight pattern.
|
|
|
|
Post by SFC (R) B on Nov 10, 2023 10:15:57 GMT -5
How is accuracy on those. Read about guys not being able to get some on them to hold tight pattern. They have a sub moa guarantee and the ones I have shot were all well within that. |
|
|
|
Post by kicker on Nov 10, 2023 10:30:08 GMT -5
I might be able to shed some light. I own a 2021 Christensens Mesa Long Range in 6.5 PRC. Most of the early 6.5 PRC experienced heavy bolt lift and some extraction issues. After a long through review by a lot of guys whom bought the initial offerings. Check out www.longrangeonly.com 6.5 prc page. The chamber is to tight more or less. Everything was based off the SAAMI specs. However, once guys started to reload the once fired brass is where the issue with the chamber arose. Basically there needs to be about .02 thousands freebore to allow the brass to expand. Another tidbit was in resizing the brass. Full length dies would not resize all the way down. I have the issue with mine, but had a custom sizing die built to fix the problem. As far as todays offerings by Christessen Arms, they have some quality issues but I think it is more from guys who think just because they bought an expensive gun that it will shoot out of the box. Pretty sure, that they just go with what ever load they are used to and shoot. verse, buying 5 or 10 different loads with different manufactures and doing load testing. On mine, it will shoot lights out with 140, 142, 144, and 147 weight bullets. It will not shoot Hornady 143x ammo worth a darn. |
|
|
|
Post by parrothead on Nov 10, 2023 10:37:26 GMT -5
I handled some of the carbon fiber one out in the Dakotas this summer at Scheels. They are nice.
|
|
|
|
Post by SFC (R) B on Nov 10, 2023 17:46:25 GMT -5
I handled some of the carbon fiber one out in the Dakotas this summer at Scheels. They are nice. I work at a Scheels (in COS) |
|
|
|
Post by esshup on Nov 11, 2023 0:22:11 GMT -5
A buddy has a Mesa in 28 Nosler and we were able to get him on steel at 1,000 yds without too much trouble.
|
|
|
|
Post by parrothead on Nov 12, 2023 9:41:44 GMT -5
That would be a par 4 for me
|
|
