|
Post by saltydog on Mar 17, 2016 7:48:09 GMT -5
Guys I was looking for some extended wheel studs for a Honda Foreman. The stock studs are about 1/2" to short for the Over sized wheels that I purchased.. (got a good deal on them). They need to be 10MM by 1 3/4" long.
|
|
|
Post by nfalls116 on Mar 17, 2016 10:10:56 GMT -5
Guys I was looking for some extended wheel studs for a Honda Foreman. The stock studs are about 1/2" to short for the Over sized wheels that I purchased.. (got a good deal on them). They need to be 10MM by 1 3/4" long. take them to advance and tell them what you need (or Napa if you prefer) they should put a micrometer on them and check the knurl to make sure they are the same size
|
|
|
Post by tjmurf on Mar 17, 2016 11:29:27 GMT -5
If you don't find them in your local area. www.mcmaster.comI use them a lot on hard to find parts. Most delivered next day if order early.
|
|
|
Post by saltydog on Mar 17, 2016 13:47:10 GMT -5
Thanks guys, I work on it today aftr wrk.
|
|
|
Post by saltydog on Mar 18, 2016 10:18:41 GMT -5
Well as most things go, they say they don't make them for that model... Dealer.... You must by the whole hub with them !!!!! I say hogwash, I start digging in deeper and in my searches found a guy had blogged the same issue. It then took me to and ATV site that guys have posted with the same issues. There it was Kawasaki part # 92153-0890. Issue resolved. Thanks guys for your recommendations.
|
|
|
Post by esshup on Mar 18, 2016 22:59:28 GMT -5
If you don't find them in your local area. www.mcmaster.comI use them a lot on hard to find parts. Most delivered next day if order early. I use McMaster for a lot of oddball stuff that isn't available locally too. Order in by 3:30 CST it's usually at my place the next day, regular shipping.
|
|