Post by omegahunter on Apr 20, 2012 6:18:00 GMT -5
I have a set of small base RCBS dies for .308 Winchester (part # 15503) for $25 TYD.
Dies are in excellent shape, no rust. I just took the dies apart last night to clean and inspect. The set came with a used press and I don't need the small base die set.
I have replaced the damaged RCBS lock rings (screws were broken off) with new, unused Hornady lock rings; this dies set is like brand new.
"Small base Die Sets are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, and some lever-action rifles. Small Base Sizer dies for bottleneck cases have vents to prevent case damage from trapped air or excessive lube. Each die is properly hardened and hand pollished. Seater dies have built in crimper appropriate for the particular caliber. Bullets can be seated without crimping. Standard 7/8 x 14 thread size."
SPECIFICATIONS:
Mfg Item Num: 15503
Category: RELOADING DIES
Type :Small Base Sizer Die
Caliber :308 Winchester
308 Uses RCBS Shell Holder #3 not included.
Link to picture: www.opticsplanet.net/rcbs-small-base-two-die-sets-308-winchester-15503.html
(if this link is not appropriate, please let me know and I will delete it)
Prefer PayPal gift or Money Order/Cashier's Check.
Would also consider trades of 165 grain HP 10mm bullets, .358 rifle bullets in either 200 grain Hornady FTX or 200 grain Barnes TTSX or 240 grain .430 XTP's. Or would consider new or once fired .25 WSSM brass.
The dies have also been put up FS on another site. I will watch timestamps on "I'll take it".
Dies are in excellent shape, no rust. I just took the dies apart last night to clean and inspect. The set came with a used press and I don't need the small base die set.
I have replaced the damaged RCBS lock rings (screws were broken off) with new, unused Hornady lock rings; this dies set is like brand new.
"Small base Die Sets are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, and some lever-action rifles. Small Base Sizer dies for bottleneck cases have vents to prevent case damage from trapped air or excessive lube. Each die is properly hardened and hand pollished. Seater dies have built in crimper appropriate for the particular caliber. Bullets can be seated without crimping. Standard 7/8 x 14 thread size."
SPECIFICATIONS:
Mfg Item Num: 15503
Category: RELOADING DIES
Type :Small Base Sizer Die
Caliber :308 Winchester
308 Uses RCBS Shell Holder #3 not included.
Link to picture: www.opticsplanet.net/rcbs-small-base-two-die-sets-308-winchester-15503.html
(if this link is not appropriate, please let me know and I will delete it)
Prefer PayPal gift or Money Order/Cashier's Check.
Would also consider trades of 165 grain HP 10mm bullets, .358 rifle bullets in either 200 grain Hornady FTX or 200 grain Barnes TTSX or 240 grain .430 XTP's. Or would consider new or once fired .25 WSSM brass.
The dies have also been put up FS on another site. I will watch timestamps on "I'll take it".