|
Post by Woody Williams on Sept 4, 2011 16:52:22 GMT -5
OOOPPPSSS!
I got my hubs and they have made a change. The rods from my blind will not fit the hubs. The collar on the ball end is a tad big to go in the hub. The ball size is fine. They must have made some changes after they had some breakage. The rod ball collar is a half inch and the opening is about 13/32. I can ream them out but I'm going to borrow a dremel tool first. I did one with a small drill bit and it takes awhile.
|
|