|
Post by deadeer on Apr 1, 2024 20:28:28 GMT -5
Looking for some new/used 25/06 brass in good shape. Anything reasonable would be welcome. Coming into a gun and dont have anything in 25 cal for reloading. Thanks.
|
|
|
Post by esshup on Apr 1, 2024 23:11:26 GMT -5
Ya mean you don't have any 30-06 brass? Let me look, I still have my cousin's Sendero in 25-06 and I'll see how many pieces of brass I have. I have Corbin forming/swaging lube......
|
|
|
Post by deadeer on Apr 2, 2024 0:18:48 GMT -5
Ya mean you don't have any 30-06 brass? Let me look, I still have my cousin's Sendero in 25-06 and I'll see how many pieces of brass I have. I have Corbin forming/swaging lube...... I got a bunch of 270win brass that will work. Just wanting some correct headstamp.
|
|
|
Post by esshup on Apr 2, 2024 8:03:34 GMT -5
Ya mean you don't have any 30-06 brass? Let me look, I still have my cousin's Sendero in 25-06 and I'll see how many pieces of brass I have. I have Corbin forming/swaging lube...... I got a bunch of 270win brass that will work. Just wanting some correct headstamp. O.K.. I'll look in an hour or so.
|
|
|
Post by esshup on Apr 2, 2024 15:33:45 GMT -5
Let me work up a load for my cousin in his Sendero. He wanted 100 rounds for deer and 100 rounds for coyotes. I bought 250 pc (150 Win, 100 Hornady) in case any weren't good (you never know). I should have 50 or close to 50 left. This is new brass.
If you are going to be shooting heavy for caliber bullets, I have 16# of WC 860 (two 8# jugs) that I bought for the 7mm AM before WC872 became available again. That is supposed to work in the 25-06 for heavy bullets. I have both .270 and 30-06 once fired brass too. (used but cleaned/polished)
|
|
|
Post by deadeer on Apr 2, 2024 18:08:42 GMT -5
I got 58 pieces of brass and loaded rounds with the gun. Didnt realize that much was coming. So no panic at this point. Will catch ya after your done with the load work.
|
|