|
|
Post by dbd870 on May 5, 2007 19:20:55 GMT -5
Well fuzzy, our Lynx is history. I was shooting this afternoon & I noticed something was defintely different as I was finishing up. I stopped and checked the bow over - the bottom limb is cracked so I'm going to have to do something. Perhaps now is the time to bite the bullet and get in the 21st century and abandon the wheel bow and get cams. RIP  |
|
|
|
Post by oggie on May 6, 2007 11:47:34 GMT -5
Any certain brand you looking for ?
|
|
|
|
Post by dbd870 on May 6, 2007 17:54:53 GMT -5
Haven't given it much thought yet. I'll get something I can set up for about 55-60#. I was at a friends house this afternoon and he has a couple of years old reflex that felt pretty good, even at 70#. I'll probably have to try some and see what I see. I've never shot a cam bow; wheels were all there were when I got out of archery before.
|
|
|
|
Post by oggie on May 6, 2007 19:22:05 GMT -5
If you are interested in shooting some Parker bows stop into my shop sometime. I have several models you can try. You won't be disappointed in them. I also have some used PSE and Mathews bows also. I am located in Gas City
|
|
|
|
Post by allegiance on May 7, 2007 20:18:53 GMT -5
I have a 05 Bowtech Allegiance 60-70lb and 29" draw length which can be changed. that I looking to sell. It has a new Vapor Trail string. I will sell it for 400.00 firm.
|
|
|
|
Post by oneshot on May 19, 2007 10:48:50 GMT -5
Good luck with picking out a new bow but whatever yopu do....don't shoot that bow with a cracked limb.
|
|
|
|
Post by dbd870 on May 20, 2007 5:59:39 GMT -5
Don't worry, it's already gone.
|
|
|
|
Post by hoosieroutdoorsman on May 20, 2007 8:35:53 GMT -5
I would give Storm Archery a look, they have some great models to fit any archer and are great shooting bows. I had mine custom built to my specs, it started out as their F-18, it is a great shooter as it sat stock. Edgell Terry the head of R&D for Storm is a great guy and one of the most knowledgable in the industry. Another reason I chose Storm is they are made in Auborn, IN
|
|
|
|
Post by davepowers on May 20, 2007 9:21:03 GMT -5
Martin Cougar
Single Cam Bow
Fuzion Cam
50-70 #
Draw Length able to go to 30 in. draw with correct module.
27=65% Module
28=65% Module
28=75% Module
$150.00
DPowers@insightbb.com
|
|
|
|
Post by dbd870 on May 20, 2007 13:24:35 GMT -5
That's the one I came out and looked at isn't it; I forgot about that one. It was close enough to what I had at the time I decided to hang on to what I had. PM me your phone no again; I should take a second look at it.
|
|
|
|
Post by dbd870 on May 26, 2007 13:40:20 GMT -5
Well I bought dpowers Cougar. So I stayed in the Marton fold. I'm very pleased with my initial session. TNX Dave.
|
|
|
|
Post by hoosieroutdoorsman on May 29, 2007 18:59:05 GMT -5
Congrats on the new bow,,Martins make some very nice shooters.
|
|
