|
|
Post by jajwrigh on Sept 2, 2011 22:45:53 GMT -5
I was cleaning a pistol today and I noticed that I always stay stocked up on the following cleaners/lubricants for all my gun care needs:
1. Hoppes #9
2. Tipton's Truely Remarkable Bore Solvent
3. Rem Oil
4. CLP Break Free
5. Kroil (newly added)
I can't foresee a need for ever changing my line up, what do you guys keep around your bench?
|
|
|
|
Post by dbd870 on Sept 3, 2011 3:03:57 GMT -5
I use Hoppes, BreakFree and Sweets
|
|
|
|
Post by mrfixit on Sept 3, 2011 5:54:26 GMT -5
The only thing I use on a regular basis would be 3 in 1 oil for lubrication and WD40 works pretty well on cleaning choke tubes. Heck even Kroger's carries 3 in 1 and WD40! Everything else such as bore cleaner, grease etc. is usually whatever I can find when I run out of the last stuff. Anything Outers or Hoppes is usually good stuff but depending on where you are and what your looking for sometimes those aren't available and you have to settle on something else.
|
|
|
|
Post by parson on Sept 3, 2011 7:09:38 GMT -5
Break Free, Kroil, oil from various gun cleaning kits over the years, and a partial bottle of #9 that I mixed with Marvel Mystery Oil. The verdicts is still out on that one, and, I understand that you ought to wear gloves when using.
Since I cast & shoot lead, I keep some of the copper cleaning pads to help if I get any lead build up.
|
|
|
|
Post by tenring on Sept 3, 2011 11:08:08 GMT -5
Bore Scrubber
Ed's Red
TM Solution
Shooters Choice
Sweets
JB Bore Paste
Break Free
Kroil
Butch's Bore Shine
Hoppes BR
Hoppes #9
Outer's Foaming Bore Cleaner
|
|
|
|
Post by hookeye on Sept 3, 2011 12:16:17 GMT -5
Dremel tool, heat gun and Kydex (making cheekpieces for rifles).
As for oils and solvents, I use Remoil, Hoppes #9, Gunscrubber. Lube is Shooters Choice red grease.
Love Kroil for working on Jeeps!
|
|
|
|
Post by hornharvester on Sept 3, 2011 14:26:43 GMT -5
Everything but the kitchen sink! h.h.
|
|
|
|
Post by danf on Sept 3, 2011 19:24:11 GMT -5
Rem Oil
40x bore paste
Break-free CLP, both aerosol and squeeze bottle (though I don't use either of them all that often)
Hoppes #9
And I just added a tube of T/C Bore Butter to wipe down the outer surfaces of the actions/barrels
A couple of tubes of Iosso stuff that I don't remember what they are exactly- one is a lube I put on the case trimmer shaft, the other shines up blued metal
|
|
