|
Post by jjas on Aug 17, 2022 13:56:11 GMT -5
|
|
|
Post by titanium700 on Aug 17, 2022 18:41:58 GMT -5
Yuck
|
|
|
Post by deadeer on Aug 17, 2022 19:36:11 GMT -5
If that's your flavor, rock on. Good to have endless ingenuity and choices!
|
|
|
Post by stevein on Aug 18, 2022 10:03:34 GMT -5
Not for me. Not just looks but the price tag of $1098 for the upper. Mod a mag to hold speed loaders or to be a speed loader. The only thing I see that may be a long way in a small port to "cap" it. Good luck to them.
I am kind of surprised someone has not come out with a crossbow rail for the AR platform.
|
|
|
Post by Woody Williams on Aug 18, 2022 10:33:46 GMT -5
Not for me. Not just looks but the price tag of $1098 for the upper. Mod a mag to hold speed loaders or to be a speed loader. The only thing I see that may be a long way in a small port to "cap" it. Good luck to them. I am kind of surprised someone has not come out with a crossbow rail for the AR platform. Too rich for my blood. PSE had a crossbow on an AR lower. It was called a TAC15 - www.shootingtimes.com/editorial/longgun_reviews_pse_tac-15_crossbow_100110/99847
|
|
|
Post by Woody Williams on Aug 18, 2022 10:37:33 GMT -5
BTW - The TAC 15 was a flash in the pan. Super long and cumbersome.
|
|
|
Post by kicker on Aug 18, 2022 11:50:18 GMT -5
I understand that not every gun made is likeable. But, when it comes to custom rifles or muzzle loaders, putting one together is not going to be cheap. take for example this manufacture. www.arrowheadrifles.com/arrowhead-muzzleloader/. I can attest that his rifles will shoot sub moa. I dont own one but have seen many in use at Friendship, IN. Home to the National Muzzleloader Association during long range hunter matches or silhouettes shooting out to 500 yds. Everybody has a budget. Some peoples are low and some are high. However, if you do other shooting sport competitions with your firearm's beside hunting, you will soon realize that an off the shelf gun may do ok but in order to win, etc you are going to have to invest in upgrading.
|
|
|
Post by esshup on Aug 18, 2022 23:24:19 GMT -5
I understand that not every gun made is likeable. But, when it comes to custom rifles or muzzle loaders, putting one together is not going to be cheap. take for example this manufacture. www.arrowheadrifles.com/arrowhead-muzzleloader/. I can attest that his rifles will shoot sub moa. I dont own one but have seen many in use at Friendship, IN. Home to the National Muzzleloader Association during long range hunter matches or silhouettes shooting out to 500 yds. Everybody has a budget. Some peoples are low and some are high. However, if you do other shooting sport competitions with your firearm's beside hunting, you will soon realize that an off the shelf gun may do ok but in order to win, etc you are going to have to invest in upgrading. Then you take Luke's Muzzleloaders and step them up a notch or 3...... www.hankinscustomrifles.com/muzzleloaders/
|
|
|
Post by Woody Williams on Aug 20, 2022 14:27:30 GMT -5
|
|
|
Post by kicker on Aug 21, 2022 7:31:25 GMT -5
Ohhh great. Thanks esshup and Woody, might be going more in debt with kimberly finance corporation. ( wife) . I have a Savage ML II but have never taken out past 250 yds Both of the profiles you guys posted are very reasonable price wise in a custom build.
|
|
|
Post by genesis273 on Aug 21, 2022 12:59:40 GMT -5
Like Deadeer said, if that's your flavor, more power to ya! Not sure if I'd like it though.
|
|
|
Post by esshup on Aug 23, 2022 8:07:44 GMT -5
Ohhh great. Thanks esshup and Woody, might be going more in debt with kimberly finance corporation. ( wife) . I have a Savage ML II but have never taken out past 250 yds Both of the profiles you guys posted are very reasonable price wise in a custom build. All I did was slap on a barrel from PacNor, but for shooting the bore riders I had to put a muzzle brake on it because the recoil was too stout for me. The PacNor barrel is a tight one, and loading the Barnes 195g bullet in the blue sabot took a LOT of pressure on the power rod. It's a lot easier to load with the bore riders. I had a friend thread the muzzle and I bought a partition style brake from the gunsmith that made my custom long range CF rifle.
|
|
|
Post by steiny on Aug 23, 2022 8:47:45 GMT -5
for Yuk !
|
|
|
Post by genesis273 on Aug 23, 2022 17:21:36 GMT -5
Ohhh great. Thanks esshup and Woody, might be going more in debt with kimberly finance corporation. ( wife) . I have a Savage ML II but have never taken out past 250 yds Both of the profiles you guys posted are very reasonable price wise in a custom build. All I did was slap on a barrel from PacNor, but for shooting the bore riders I had to put a muzzle brake on it because the recoil was too stout for me. The PacNor barrel is a tight one, and loading the Barnes 195g bullet in the blue sabot took a LOT of pressure on the power rod. It's a lot easier to load with the bore riders. I had a friend thread the muzzle and I bought a partition style brake from the gunsmith that made my custom long range CF rifle. Looks really nice!
|
|