|
|
Flyers?
Oct 4, 2015 16:40:25 GMT -5
via mobile
Post by firstwd on Oct 4, 2015 16:40:25 GMT -5
I am a bit frustrated with my arrows right now. I'm dropping 3 arrows in a half dollar sized group, but seem to have a fourth that keeps landing 6 inches off. Mostly it's to the left, but has been to the right a couple times.
Is it normal to have one Rouge arrow with the modern manufacturing process of carbon arrows?
|
|
|
|
Post by dbd870 on Oct 5, 2015 7:16:53 GMT -5
Same arrow I assume? If it is same one every time then I'd pitch it and press on.
|
|
|
|
Post by trapperdave on Oct 5, 2015 7:28:40 GMT -5
mark your arrows, if its the same one fix it or toss it.
|
|
|
|
Post by trapperdave on Oct 5, 2015 7:29:27 GMT -5
field tip shoot off or just broadhead? could be a misalignment issue with the insert or bent head
|
|
|
|
Flyers?
Oct 5, 2015 11:37:01 GMT -5
via mobile
Post by firstwd on Oct 5, 2015 11:37:01 GMT -5
I was fairly certain it was the same one last night. I found my sharpie and will number and check tonight.
Field tips, I haven't gotten my broadheads delivered yet.
|
|
|
|
Flyers?
Oct 5, 2015 11:50:51 GMT -5
Post by trapperdave on Oct 5, 2015 11:50:51 GMT -5
double check nock/fletch orientation. might just be a turned nock causing clearance issues.
|
|
|
|
Flyers?
Oct 5, 2015 21:53:14 GMT -5
via mobile
Post by firstwd on Oct 5, 2015 21:53:14 GMT -5
It was dark when my feet hit the ground and I didn't get around the shooting tonight. I'll check knocks, mark arrows, and see what I get after my visit to the optometrist tomorrow evening.
|
|
|
|
Post by firstwd on Oct 7, 2015 22:12:52 GMT -5
I got out and shot tonight. It seems that the arrows are fine and the flyers were the result of me pulling my head or relaxing my shoulder just before firing off my release.
Practice, practice, practice. I'm down to touching groups at 20 yards, 3 to 4 inch groups at 30 yards, and needing more practice at 40 yards. :-)
|
|
|
|
Flyers?
Oct 7, 2015 22:28:00 GMT -5
via mobile
Post by nfalls116 on Oct 7, 2015 22:28:00 GMT -5
My problems are almost always me and not my equipment
Glad you figured it out!
|
|
